Project: SpiritOfMudsuck   -  
            Listing for Category : Ext. Finish
    (Please mouse-over any icon to get a description of that function).


  
Builder Name:Pete Dailey   -  
Project:   Sonex - Xenos-B Motorglider   -   VIEW REPORTS
Total Hours:1506.3
Total Flight Time:
Total Expense:$75148.03
Start/Last Date:Jul 01, 2016 - No Finish Date
Engine:Aerovee 2.1 Turbo
Propeller:Sensenich
Panel:MGL Avionics Explorer iEFIS/ECB/RDAC
 
Friendly URL: https://eaabuilderslog.org?s=SpiritOfMudsuck

Home or Last Project Picture

Jun 18, 2021     Prep and Prime Fuselage - (2.1 hours)       Category: Ext. Finish
Wiped down bare surfaces with acetone and Scotchbright. Sanded prior application to knock down orange peel and 'pimpling' areas with 320/400 grit on 5" cordless orbital sander. Wiped down with tack cloth. Taped holes to reduce flow through.
Wore organic solvent filter. Stirred and strained 6 oz Eastwood OptiFlow epoxy base, added 6 oz catalyst. Twelve oz was just sufficient quantity to apply to entire fuselage, the leading edge and control surfaces of the tail. Started interior priming at high wear (hand and finger prints) surfaces at cockpit bulkhead.


 


NOTE: This information is strictly used for the EAA Builders Log project within the EAA organization.     -     Policy     -     © Copyright 2024 Brevard Web Pro, Inc.